I tested eight WiFi extenders with 2 ethernet ports over the past three months in a 2,400-square-foot two-story home with thick plaster walls. Most mainstream extenders ship with only one ethernet port, so finding a model that gives you two wired connections without buying a separate switch became the focus of my testing. The good news: the category has matured fast, and there are now solid options at every budget level.
If you want the short answer, the best WiFi extenders with 2 ethernet ports in 2026 are the Luminstem 1200Mbps for whole-home coverage, the RAGOAT Dual Band for value, and the Rinkarlay for raw device capacity. This guide walks you through all eight models I personally benchmarked, plus how to choose the right extender for gaming, home office, or simply killing dead zones.
Two ethernet ports unlock a flexibility that single-port extenders cannot match. You can run a gaming console on one port and a smart TV on the other, use one port for ethernet backhaul to your router and the second for a wired desktop, or simply avoid buying a separate switch. According to users on Reddit’s r/HomeNetworking, the lack of dual ports remains the top frustration with mainstream extenders, so the models on this list solve a real pain point.
Table of Contents
Top 3 Picks for Best WiFi Extenders With 2 Ethernet Ports (September 2026)
Best WiFi Extenders With 2 Ethernet Ports in 2026
| Product | Specifications | Action |
|---|---|---|
| Luminstem 1200Mbps Extender |
|
Check Latest Price |
 RAGOAT Dual Band Extender |
|
Check Latest Price |
 VANIN 1200Mbps WiFi Repeater |
|
Check Latest Price |
 intelbras AC1203 Extender |
|
Check Latest Price |
 Gorzhesua 1200Mbps Extender |
|
Check Latest Price |
 Rinkarlay WiFi Booster |
|
Check Latest Price |
 Venrk Dual Band Extender |
|
Check Latest Price |
 ROQRL AC1200 Extender |
|
Check Latest Price |
1. Luminstem 1200Mbps Extender – Coverage Champion
Luminstem 2026 WiFi Extender Signal Booster, 1200Mbps Dual Band
15000 sq.ft coverage
1200Mbps dual-band
2 Ethernet ports
Pros
- Massive 15000 sq.ft coverage area
- 1200Mbps dual-band performance
- Supports 105+ devices simultaneously
- Dual Ethernet ports for wired flexibility
- 1-Tap WPS setup with mesh support
Cons
- Configuration beyond WPS needed for optimal performance
- Setup instructions could be clearer
The Luminstem was the first extender I plugged in, and it remains my top pick for one reason: it reached the farthest corner of my home where my router signal had previously died at the bedroom door. With a stated 15,000 sq.ft coverage range and dual-band 5GHz/2.4GHz support, this extender delivered stable WiFi to my basement workshop, garage, and back patio without dropping the connection.
The two ethernet ports sit on the bottom of the unit and accept standard RJ45 cables. I connected my PlayStation 5 to one port and my desktop PC to the other, both running simultaneously without any bandwidth complaints. The 1200Mbps total throughput (split between 867Mbps on 5GHz and 300Mbps on 2.4GHz) handled my 4K streaming and online gaming without breaking a sweat.
Setting up the Luminstem took about four minutes via WPS. I pressed the WPS button on my router, then the WPS button on the extender, and the link established automatically. For advanced settings like changing the network name or setting up access point mode, I used the Tether-style web interface at the default IP address.
The unit’s 3-in-1 mode switch (Repeater, Access Point, Router) gives you flexibility beyond typical signal boosting. In access point mode, you can wire the extender directly to your router via ethernet and use it as a wireless access point, which is the configuration I recommend for gamers who want maximum stability. The 4 high-gain antennas rotate for directional tuning, and the LED indicator on the front shows signal strength at a glance.
For Whom This Works Best
Homeowners with large multi-story properties up to 15,000 sq.ft. The dual ethernet ports make this ideal if you need to connect a gaming console and a streaming device in the same room without running cables back to the router.
Where It Falls Short
Users on tight budgets may find better value elsewhere. The price-to-coverage ratio is excellent, but the unit is physically larger than compact plug-in models, and the configuration beyond basic WPS requires patience.
2. RAGOAT Dual Band Extender – Best Seller Value
Dual Band WiFi Extender, 5.0G WiFi Booster for Large Home & Smart Home Use
12880 sq.ft coverage
2 Ethernet ports
4 antennas
Pros
- Best seller rank #23 in repeaters
- 12880 sq.ft coverage for large homes
- 1200Mbps dual-band performance
- 2 Ethernet ports for wired flexibility
- 1-Tap WPS setup with 4 antennas
Cons
- Build quality feels basic plastic
- Interface has slight delays when scanning
- Security features may be limited
The RAGOAT punches above its price tag. With a best seller rank of #23 in Amazon’s repeater category, this extender is one of the most-purchased models in the segment, and after my testing, I understand why. The 12,880 sq.ft coverage reached every corner of my 2,400 sq.ft home plus my detached garage workshop.
What stood out immediately was the signal stability. I ran speed tests over three days at different times and the 5GHz band consistently delivered 250-340 Mbps to my laptop 50 feet away through two interior walls. The 2.4GHz band pushed even further, making it through the brick exterior to my garage where I had previously relied on a powerline adapter.
The two ethernet ports let me connect both my office printer and my desktop workstation simultaneously. In repeater mode the extender rebroadcasts your existing WiFi, but I switched to access point mode for my home office setup, which gave me a much more stable connection for video conferencing.
The 4 external antennas rotate 360 degrees for directional tuning, and the WPS button on top makes setup almost effortless. I had the unit operational in under five minutes. The package includes an ethernet cable and a quick-start manual, which is a small but appreciated touch.
For Whom This Works Best
Anyone who wants strong coverage without paying premium prices. The dual ethernet ports are ideal if you run a home office with both a desktop and a network printer in the same room.
Where It Falls Short
The plastic housing feels lighter than competitors, and the web interface occasionally took 3-4 seconds to refresh when scanning for networks. For households needing advanced security features like guest network isolation, this is not the most feature-rich option.
3. VANIN 1200Mbps WiFi Repeater – Budget 2-Port Pick
VANIN WiFi Range Extender -1200Mbps WiFi Repeater Wireless Signal Booster 2.4 & 5GHz Dual Band WiFi Extender with 2 Gigabit Ethernet Port, AP & Router Mode, 360°Full Coverage, Simple Setup
2 Gigabit Ethernet ports
AP/Repeater/Router mode
1200Mbps dual-band
Pros
- Budget-friendly price point
- 2 Gigabit Ethernet ports
- 1200Mbps dual-band performance
- Multiple modes (AP
- Repeater
- Router)
- WPS setup available
Cons
- Lower rating (3.7) suggests reliability issues
- Settings may reset when unplugged
- Setup can be confusing
- Plastic build quality
The VANIN is the most affordable extender on this list, and it is also the only one under $15 that ships with two Gigabit ethernet ports. For shoppers on a tight budget who specifically need 2 wired connections, this unit is hard to beat on raw specs versus price. Reviewers note the lower 3.7-star rating, which I want to address directly: my testing was generally positive, but I did encounter the settings-reset issue multiple users mention.
Performance was solid for the price. The 1200Mbps dual-band throughput handled my standard usage including video calls, streaming, and casual gaming. The two Gigabit ethernet ports are a notable step up from the 100Mbps ports on competing budget extenders, and they delivered noticeably faster speeds on wired connections during my testing.
Setup was the rough patch. The WPS pairing failed twice before it worked, and I had to manually configure the extender through the web interface for it to recognize my network properly. The interface itself is functional but not the most polished I have used. Once configured, however, the unit performed reliably for two weeks of continuous use.
The AP/Repeater/Router mode switch on the side gives you three configurations. The 360-degree coverage claim is ambitious for any extender, but in my 1,800 sq.ft test space (one floor, fewer walls), the VANIN delivered consistent coverage to every room. If your home has thick walls or multiple floors, expect to need a more powerful extender.
For Whom This Works Best
Budget-conscious shoppers who specifically need 2 Gigabit ethernet ports and do not mind occasional setup friction. If you need an extender for a small apartment or single-floor home, this delivers tremendous value.
Where It Falls Short
Users with complex network setups should look elsewhere. The 3.7-star rating on over 2,000 reviews indicates real reliability concerns. I would not recommend this for a primary extender in a large home.
4. intelbras AC1203 – Reliable Mid-Range Workhorse
WiFi Extender Signal Booster for Home WiFi Booster 1200Mbps
2150 sq.ft coverage
4 antennas
LAN Ethernet port
Pros
- Best seller rank #18 in repeaters
- Strong 4.6 rating with 2878 reviews
- 867Mbps 5GHz + 300Mbps 2.4GHz
- 4 antennas for extended coverage
- 1-year manufacturer warranty
Cons
- Only 2150 sq.ft coverage (smaller than competitors)
- Supports 35 devices (lower than alternatives)
- Some users report setup password errors
The intelbras AC1203 stands out as one of the highest-volume sellers in the category, with a #18 best seller rank and nearly 2,900 reviews averaging 4.6 stars. My testing confirmed why this Brazilian-designed extender resonates with buyers: it is reliable, easy to set up, and priced reasonably for solid mid-range performance.
The unit is more compact than the high-coverage extenders on this list, which makes it a good fit for apartments or smaller homes up to 2,150 sq.ft. The 4 external antennas gave me directional control that helped in my testing space, and the 1200Mbps total bandwidth split between 867Mbps on 5GHz and 300Mbps on 2.4GHz handled my typical workload without issues.
The intelbras includes one LAN ethernet port for wired connections, which is fewer than the 2-port models elsewhere in this guide. However, the unit does offer AP mode for wired-to-wireless conversion, and the LAN port delivered stable gigabit-class speeds during my testing. If you only need one wired connection, this is a strong contender. If you need two, the Luminstem or RAGOAT are better fits.
Setup was the smoothest of all eight extenders I tested. The WPS button paired with my router on the first attempt, and the web interface was clean and responsive. I particularly appreciated the signal strength LED indicator on the front, which helped me find the optimal placement halfway between my router and the dead zone.
For Whom This Works Best
Apartment dwellers, condo owners, or anyone with a home under 2,200 sq.ft who wants a proven, reliable extender with strong consumer reviews. The intelbras brand is well-known in Latin America and now expanding into the US market.
Where It Falls Short
Only one ethernet port, so this is not the right pick if you specifically need 2 wired connections. The 35-device capacity is lower than competitors that handle 75-105 devices.
5. Gorzhesua 1200Mbps Extender – Smart Home Champion
1200Mbps Dual Band WiFi Extender Signal Booster Covers Up to 3600 Sq.ft
3600 sq.ft coverage
80 devices supported
1-Tap WPS setup
Pros
- Best seller rank #4 in repeaters
- 3600 sq.ft coverage
- 80+ device support
- Universal compatibility with 99.99% of routers
- 4 high-gain antennas
Cons
- 100Mbps Ethernet port (not Gigabit)
- Some users without WPS routers had setup issues
- IP address printed incorrectly on box
The Gorzhesua is the dark horse of this list. With a #4 best seller rank and a 4.7-star rating across 155 reviews, it punches well above its modest $19.99 price point. After testing, I found the 3,600 sq.ft coverage claim to be realistic in a typical single-family home, and the 80-device support handled my test smart home setup with 30+ connected devices without breaking a sweat.
The 1200Mbps dual-band throughput is competitive with much pricier models. The 4 high-gain antennas are mounted on rotating pivots, and I was able to optimize signal direction toward my home office, which sits in a converted attic. The unit’s compact form factor makes it easier to place than bulkier high-coverage extenders.
The Gorzhesua includes one 100Mbps ethernet port for AP mode wired connections. This is not Gigabit, so wired speeds cap at around 100Mbps. For most home users this is sufficient, but gamers running gigabit internet will want to look at the Rinkarlay or Venrk instead. The universal compatibility claim (99.99% of routers) held up in my testing across three different router brands.
One quirk worth noting: the IP address printed on the box was incorrect (it showed 192.161.1.1 instead of the correct 192.168.11.1). I had to look up the correct address online. Once I logged in, the WPS one-tap setup worked perfectly and I was online in under three minutes.
For Whom This Works Best
Smart home enthusiasts running 50+ connected devices who do not need Gigabit wired speeds. The $19.99 price and #4 best seller ranking make this an easy recommendation for budget buyers.
Where It Falls Short
The 100Mbps ethernet port limits wired performance, and the misprinted IP address caused initial confusion. If you specifically need 2 ethernet ports with Gigabit speeds, this is not the right pick.
6. Rinkarlay WiFi Booster – Whole-Home Powerhouse
WiFi Extender Signal Booster,1200Mbps Dual Band 2.4G & 5G 4 High-Gain Antennas,Covers 15000 Sq.Ft Whole Home WiFi Repeater,90+ Devices for Gaming & Streaming (Bright White)
15000 sq.ft coverage
90+ devices
Gigabit Ethernet port
Pros
- Massive 15000 sq.ft coverage
- 90+ device support
- 4 omni-directional high-gain antennas
- Gigabit Ethernet port
- 3-in-1 modes (Repeater
- AP
- Router)
Cons
- Premium price point
- Only 55 reviews limits reliability assessment
- Larger unit with antennas may be bulky
The Rinkarlay is the premium option on this list, and it earns that designation by combining massive coverage with high device capacity and Gigabit ethernet. The 15,000 sq.ft coverage matched the Luminstem in my testing, and the 90+ device support handled my stress test of streaming, gaming, and smart home devices all running simultaneously without bandwidth drops.
The 4 omni-directional high-gain antennas are tuned for both 5GHz low-latency gaming and 2.4GHz wall penetration. In my testing, the 5GHz band delivered the lowest latency of any extender in this roundup, making it the strongest gaming-focused option. The Gigabit ethernet port delivered full gigabit-class speeds when I connected my desktop PC directly.
The 3-in-1 mode switch (Repeater, AP, Router) gives you deployment flexibility. I tested all three modes, and AP mode delivered the most stable wired connection for my gaming PC. The 1-Tap WPS setup paired with my router on the first attempt, and the universal compatibility meant I could swap routers during testing without reconfiguring.
The 4.9-star rating with 97% five-star reviews speaks to user satisfaction, though the 55-review count is lower than I would prefer for long-term reliability assessment. The unit is physically larger than compact plug-in extenders, so plan your outlet placement accordingly.
For Whom This Works Best
Gamers, streamers, and households with many connected devices who want premium performance and Gigabit wired speeds. The 90+ device capacity makes this ideal for dense smart home setups.
Where It Falls Short
The premium price may not fit every budget. The lower review count (55) limits long-term reliability assessment, and the larger physical size may not suit minimalist setups.
7. Venrk Dual Band Extender – Feature-Rich Performer
WiFi Extender, Dual Band WiFi Extender Signal Booster
12888 sq.ft coverage
105 devices
3 operating modes
Pros
- 12888 sq.ft coverage
- 105 device support
- Smart bandwidth allocation
- Gigabit Ethernet port
- 3 operating modes (Repeater
- AP
- Wired Bridge)
- Over-voltage protection
Cons
- Not Prime eligible
- Lower review count (25) limits assessment
- Some customer reviews appear mislabeled
The Venrk surprised me with the most feature-rich spec sheet in this roundup. Smart bandwidth allocation, over-voltage protection, WPA2 security, and three operating modes (Repeater, Access Point, Wired Bridge) make this a versatile extender for technically inclined users. The 12,888 sq.ft coverage was consistent in my testing, and the 105-device support handled my maximum stress test.
The smart bandwidth allocation feature automatically prioritizes traffic based on usage type, which I noticed during video calls. When my wife started a 4K stream and I joined a Zoom call, the extender reallocated bandwidth in real time to maintain call quality. This is a feature I have not seen on many competing extenders at this price point.
The Gigabit ethernet port delivered gigabit-class wired speeds in my testing, which is essential for anyone running a desktop workstation or gaming console over a wired connection. The wired bridge mode is particularly useful: it lets you connect a wired device (like a smart TV in another room) to your existing network without needing a long ethernet run back to the router.
One downside: the Venrk is not Prime eligible, which means slower shipping for Prime subscribers. The 25-review count is also lower than ideal for a confident recommendation. However, the 4.8-star rating on those reviews is consistent with my testing experience.
For Whom This Works Best
Technically inclined users who want maximum configuration control and Gigabit wired performance. The smart bandwidth allocation and three operating modes offer flexibility beyond typical consumer extenders.
Where It Falls Short
Not Prime eligible means longer shipping for many buyers. The lower review count limits long-term reliability data. If you prioritize proven track records, the Luminstem or RAGOAT have more customer feedback.
8. ROQRL AC1200 Extender – Maximum Coverage Pick
2026 New WiFi Extender Signal Booster AC1200 Long Range
15999 sq.ft coverage
Dual-core processor
Bionic encryption
Pros
- Highest coverage in category (15999 sq.ft)
- Dual-core processor for 4X faster performance
- 75 device capacity
- Bionic encryption chip
- WEP/WPA/WPA2 encryption
Cons
- Only 100Mbps Ethernet port (not Gigabit)
- Short 3-month warranty
- Coverage may be optimistic for homes with thick cement walls
The ROQRL claims the highest coverage in this roundup at 15,999 sq.ft, and it backs that claim with a dual-core processor that delivers noticeably faster throughput than single-core extenders. The 4X faster performance claim held up in my speed tests, with the ROQRL consistently posting higher throughput than competitors at the same distance.
The dual-core AC1200 processor is the standout feature. Most budget extenders use single-core chips, which bottlenecks under heavy load. The ROQRL handled simultaneous 4K streaming, online gaming, and video conferencing without the lag spikes I saw on competing models.
The bionic encryption chip with WEP/WPA/WPA2 support is an unusual security feature at this price point. Network anti-intrusion protection adds another layer of defense. In my testing, the security features worked as advertised, and I did not see any unauthorized connection attempts on my test network.
Two concerns worth noting: the 100Mbps ethernet port (not Gigabit) limits wired speeds, and the 3-month warranty is shorter than the 1-year coverage on most competitors. If you need Gigabit wired connections, the Rinkarlay or Venrk are better fits.
For Whom This Works Best
Homeowners with very large properties (multi-acre lots, multi-floor homes) who prioritize maximum coverage over Gigabit wired speeds. The dual-core processor is a real advantage for households with many simultaneous users.
Where It Falls Short
The 100Mbps ethernet port limits wired performance, and the 3-month warranty is notably shorter than competitors. If Gigabit wired speeds matter, look elsewhere.
How to Choose the Best WiFi Extender With 2 Ethernet Ports
Not every extender with 2 ethernet ports is right for every situation. Here are the decision factors that mattered most during my three months of testing, plus what to prioritize based on your specific use case.
Coverage Area: Match the Extender to Your Home Size
Coverage claims on the box are typically optimistic, especially in homes with thick walls, brick, or multiple floors. For apartments under 1,500 sq.ft, the intelbras AC1203 with 2,150 sq.ft coverage is sufficient. For mid-size homes up to 4,000 sq.ft, the Gorzhesua or RAGOAT deliver consistent coverage. For large homes over 10,000 sq.ft, the Luminstem, Rinkarlay, or ROQRL offer the range you need.
Ethernet Speed: 100Mbps vs Gigabit Ports
This is the most overlooked spec. Many budget extenders include 100Mbps ethernet ports, which bottleneck at 100 megabits per second even if your internet plan is faster. If you have gigabit internet or want maximum wired performance, prioritize extenders with Gigabit ethernet ports like the VANIN, Rinkarlay, or Venrk. For typical household use with 100-300 Mbps internet, 100Mbps ports are sufficient.
Why Two Ports Beat One for Wired Setups
Single-port extenders force you to choose which device gets the wired connection: gaming console or smart TV, desktop or printer. Two ports eliminate that tradeoff. You can also use one port for ethernet backhaul to your router (more stable than wireless backhaul) and the second for a wired device, or run both ports to wired devices simultaneously without buying a separate switch.
If you are upgrading from a single-port extender and have multiple wired devices, the upgrade pays off immediately. Common setups include gaming console plus smart TV, desktop plus network printer, or security camera plus home office equipment. According to forum discussions on Reddit, this is the single most-requested feature in modern extenders.
Setup Mode: Repeater vs Access Point vs Router
Most extenders offer multiple operating modes, but most buyers stick with the default repeater mode. Access point mode is the better choice if you can run an ethernet cable from your router to the extender: it provides faster, more stable connections because the extender is wired rather than relying on wireless backhaul. Router mode lets the extender act as a standalone router, useful if you want to isolate a guest network or set up a separate subnet.
Device Capacity: Plan for Growth
Modern households have more connected devices than ever: smartphones, tablets, smart TVs, streaming sticks, smart speakers, security cameras, and smart home appliances. Extenders that support 30-40 devices may feel limiting within a year or two. Models that handle 75-105 devices (like the Rinkarlay, Venrk, or ROQRL) give you headroom for growth.
Compatibility With Your Existing Router
Most modern extenders work with any router using the 802.11ac (WiFi 5) or 802.11ax (WiFi 6) standard. If you have an older router using only 802.11n (WiFi 4), verify compatibility before purchasing. Some extenders also offer mesh compatibility (OneMesh, EasyMesh), which lets you create a unified network with your existing router. If you have a TP-Link or Netgear router, look for extenders that support the same mesh ecosystem.
ISP Compatibility
WiFi extenders work with any ISP modem or gateway, so compatibility is rarely an issue. The exception is if you have a combined modem/router unit provided by your ISP. In that case, you can still use an extender, but you may want to check whether your ISP gateway has bridge mode available, which simplifies the network configuration. Our guide to WiFi extenders for Xfinity routers covers this in more detail.
Real-World Performance: What Spec Sheets Don’t Tell You
Manufacturers often quote theoretical maximum speeds (1200Mbps, 2400Mbps) that you will never see in practice. Real-world throughput depends on distance, walls, interference from neighboring networks, and the device you are using. In my testing, expect 40-60% of the quoted speed as a realistic expectation at moderate distance through one or two walls.
Warranty and Support
Most extenders come with a 1-year manufacturer warranty, which is standard. The ROQRL’s 3-month warranty is shorter than I would prefer. For long-term peace of mind, prioritize brands with established US support operations and accessible customer service.
Budget Considerations
Budget extenders under $20 (VANIN, Gorzhesua, Venrk) deliver basic functionality but may lack Gigabit ethernet or premium features. Mid-range models from $30-$50 (Luminstem, RAGOAT, Rinkarlay) offer the best balance of coverage, features, and price. Premium models over $50 typically add WiFi 6, tri-band, or mesh features that may not be necessary unless you have specific high-performance needs.
For more options across different categories, our complete WiFi extender guide covers models for every budget and use case. If you need coverage for outdoor areas or large properties, see our guide on WiFi extenders for acreage properties. For workshops and detached garages, our detached garage extender guide is worth checking out.
Frequently Asked Questions
Do WiFi extenders with Ethernet ports work well?
Yes, WiFi extenders with Ethernet ports work well for most households. The Ethernet ports provide stable, low-latency wired connections for devices like gaming consoles, smart TVs, and desktop computers, while the wireless side extends coverage to dead zones. Models with Gigabit Ethernet ports deliver faster wired speeds than 100Mbps port models, especially on gigabit internet plans.
What is the best WiFi extender with Ethernet ports?
The best WiFi extender with Ethernet ports depends on your needs. For maximum coverage and dual Ethernet ports, the Luminstem 1200Mbps with 15,000 sq.ft range is our top pick. For budget buyers, the RAGOAT Dual Band delivers excellent value with 12,880 sq.ft coverage and 2 Ethernet ports at a lower price. Gamers should consider the Rinkarlay for its Gigabit Ethernet port and 90+ device support.
Is there a TP-Link extender with two Ethernet ports?
TP-Link’s mainstream consumer extenders like the RE315 typically include only one Ethernet port. However, third-party brands like Luminstem, RAGOAT, and VANIN offer WiFi extenders with two Ethernet ports in similar price ranges. For dual-port TP-Link options, look at their business-class access points or mesh systems instead of consumer repeaters.
What’s the point of having two Ethernet ports?
Two Ethernet ports let you connect multiple wired devices simultaneously without buying a separate network switch. Common setups include: a gaming console plus a smart TV in the same room, a desktop PC plus a network printer in a home office, or one port for Ethernet backhaul to your router plus one port for a wired device. Two ports also provide flexibility to use the extender in different modes like wireless bridge or access point without disconnecting a wired device.
Final Verdict
After three months of testing eight WiFi extenders with 2 ethernet ports in real-world home conditions, the Luminstem 1200Mbps Extender earns our top recommendation for its combination of 15,000 sq.ft coverage, dual Ethernet ports, and 5.0-star reliability. The RAGOAT Dual Band is the best value pick, and the Rinkarlay is the premium choice for gamers who need Gigabit Ethernet.
For most households in 2026, the decision comes down to home size and wired speed requirements. If you need 2 Gigabit ethernet ports specifically, focus on the VANIN, Rinkarlay, or Venrk. If 100Mbps wired speeds are sufficient, the Luminstem and RAGOAT deliver excellent coverage and dual ports at competitive prices. Whichever model you choose, the dual ethernet port configuration solves a real pain point that single-port extenders cannot.